I have two new finished objects to show you, both made from Knit Picks Cotlin yarn in Moroccan Red, an inexpensive DK weight cotton-linen blend. I blogged about it before here, when I made a Bainbridge Scarf with it for my friend Jeanne.
Now that I’ve used it a bit more, some further thoughts: the color of this yarn is lovely and bright, and the yarn is pretty soft and drapey as far as I can tell. The two things I disliked about it were the occasional long, pokey fibers I would have to pull out of the yarn, presumably bits of flax, and its tendency to shed red fuzz as I was knitting with it (mentioned in my last post). It made me feel sneezy, and if I washed my hands after knitting with it for a while, little red fuzz pills would rub off my palms. These skeins seemed less fuzzy than the one I knit before–maybe it’s the effect of aging the yarn a bit.
I was undecided before, but I’ve decided I like it after all and I would use it again, especially since they’ve added a bunch of new colors that are right up my alley. Of the old ones, only this red and the natural linen color really appealed to me. Maybe Nightfall. But I wasn’t crazy about the sherbet colors like coral and turquoise. I love all the new ones, though–Coffee, Glacier, and Kohlrabi are all beautiful.
The Cotlin yarn for these two new FOs and the Bainbridge scarf is all from the same batch. I got it from chemgrrl, who bought too much for her super-adorable Cherry sweater. I was curious about it, so she gave me the skein I made into the Bainbridge scarf, and then she swapped me the sweater quantity, plus some mohair, for some Elann Den-m-nit
I had so she could make a jacket or something for her small niece.
I had it lined up for a lobster for a friend’s baby, but I’ll have to find a different red yarn for that, because the Cotlin is now all used up!
First up, Rusted Root! (Wow, it’s been ages since I’ve done a proper FO post)
Pattern: Rusted Root, from Zephyr Style, given to me as a Random Act of Kindness by knottygnome
Size made: Small (for 32-35″ bust), although my gauge wound up being off and the sweater measured about 34″ before blocking when it should have been 32″. Not that the pattern tells you this, of course.
Yarn used: Knit Picks Cotlin, Moroccan Red, approximately 4.5 skeins
Needles used: US size 7/4.5 mm Denises for most of the sweater; US size 3/3.25 mm for the ribbing on the sleeves
Date started: May 5, 2008
Date finished: May 11, 2008
Mods: More tedious details about size and yarn usage can be found on the Ravelry page. I started with the neckline ribbing (since you pick up the same number of stitches as you cast on, in the same ratio, without short rows or any such things going on, I see no particular reason to pick up the neckline later) and worked 5 rows instead of 3, using the larger needles instead of going down a size. I did paired M1 increases around the raglan seam lines (lift from back and knit through front loop, k2, lift from front and knit through back loop).
I totally reworked the waist shaping, and then my gauge was off and I was unable to finish my reworked shaping scheme anyway–after I’d worked only 3 sets of hip increases out of my desired 5, the sweater was long enough and I decided to stop.
I also put in Elizabeth Zimmermann’s phoney seams on the sides before starting the ribbing.
I knit the neck and hip ribbing (about 9 rows) on size 7 needles, since I didn’t want them to draw in particularly, then knit the sleeve ribbing for 5 rows on size 3’s (I used k1fb to increase one on each sleeve to make the k2, p1 ribbing pattern work properly).
I used a sewn bindoff for the sleeves to make them stretchy, and a suspended bindoff in rib for the hip (since I hate sewing with that long, long tail over long distances… I really should have used the sewn bindoff at the hip, too; it could definitely be stretchier, but it’s not terrible as is, either.)
I hope to have more photos later. It’s unblocked and hot off the needles in this photo (so it’s all uneven and lumpy, and it’s being worn over a clearly unsuitable tunic top instead of a camisole).
The thing is, I committed a Cardinal Sin of knitting with this sweater. I didn’t knit or wash my swatch the way I would wash my finished garment–I knit a flat swatch instead of one in the round (hence the aforementioned gauge issues), then hand-washed and laid it flat instead of machine-washing and drying. Then I finished the sweater and threw it in the washer and dryer. We’ll see what happens! Hopefully I can still wear the sweater afterwards. It seems silly to have to hand-wash and flat dry what is essentially a t-shirt, so if it’s not easy care, I guess I might as well find out now instead of after it’s a cherished essential piece in my wardrobe and I accidentally toss it in the hamper. Anyway, I did read up on it beforehand and people have said it tightens up a bit and takes very well to machine washing. Not sure about drying. If it’s a disaster, I surely will have notes on it in the near future–it’s in the dryer as I type this. Wish me luck!
While I think the finished top is really cute, I did find the pattern kind of weird and annoying to work with at certain points, for a few minor reasons. Believe me, I totally understand the headaches of trying to sort these things out when drafting a pattern, and I don’t think I could do any better (people who live in glass houses shouldn’t point fingers at other people’s pattern-writing abilities!) but nonetheless, should you be in the market for Zephyr Style patterns and wondering about how they’re written, let me tell you what my gripes with this were:
- No schematics in the pattern. This is the biggest annoyance. I couldn’t decide if I should make the XS or the S (since both cover a 32” bust)–seems like the S gives a 32” actual bust size, meaning negative ease if you’re on the larger end of the range. I wasn’t sure if the sleeves would actually fit over my biceps (thankfully, they did)–I had an issue with the sleeves being too tight on my Green Gable and had to redo my bind-offs on that top before I could actually wear it. There is also no information about the intended or modeled ease.
- No stitches put on hold/cast on at the underarm. Just a note, not a gripe (yet). I’ve just seen the put 8%-of-underarm-stitches-on-hold thing in numerous patterns, though I’m not sure what type of functional difference it makes in the fit. I’ll see how it fits when it’s done and washed.
- Asymmetrical waist shaping decreases. OK, actually, there’s nothing wrong with this, but I kind of like symmetrical ssk/k2tog shaping on either side of a seam instead of using just k2tog on one side of the seam.
- Very sparse with the stitch counts. I’m pretty sure I got it right, but it would have been very helpful to see a detailed breakdown of stitch counts in the puff sleeve increase/decrease sections in particular so I could easily double-check my work and see if everything was OK. I’m not personally bothered by the lack of information about the increase rounds, as I’m capable of figuring out the number of increases per increase round from looking at the directions, but a beginner might have issues.
- The lace is not charted out, and sl1-k1-psso is written as 3 separate steps (separated by commas) which confuses me since the 3 steps consume 2 stitches and result in 1 stitch. I prefer seeing it written using hyphens/dashes. In any case, I rewrote it using ssk.
- The lace also calls for you to read your knitting on every other round, knitting into the knit stitches and YOs and purling into the purls. I don’t mind this, but again, if you’re a beginner, it might be easier to have it specified as “Row 10: K7, p2, k6″ etc.
- As someone’s notes somewhere on the internet point out (I can’t find them now, of course), the poof in the sleeves tends to vanish for many people, probably because of the tiered increases–i.e. XS and S have the same number of increases for the puffed sleeves, meaning the XS sleeves will be puffier than the S in proportion to the rest of the sweater, and the same deal for M/L, XL/XXL. We’ll see how mine come out. I don’t have my heart set on it either way.
- Not a lot of information about the techniques they use. M1 is specified as Make One, but there are at least 4 different actual increases that could mean. The instructions for knitting the sleeves on two circulars are very sparse (they tell you to divide the stitches onto two circulars and knit in the round, but I can see this potentially causing issues for a beginner who wasn’t familiar with the technique). No cast-on is specified, even though they specify that you should use the backwards loop cast-on in their FAQ because apparently a lot of people were having issues with their necklines or underarm seams binding because the cast-on wasn’t stretchy enough.
It’s been ages since I made Green Gable, but I remember having some of the same issues with that top as well.
Anyway–I’m excited about wearing it, so thank you again for the pattern, knottygnome! I desperately hope it fits when it comes out of the dryer.
I had a bit of the yarn left over, about half a skein, so I cast on for a dishcloth.
Pattern: Yvonne’s Double Flower Cloth
Yarn used: Knit Picks Cotlin, Moroccan Red, approximately 1 skein
Needles used: A set of 5 US size 8/5 mm bamboo DPNs (sort of annoying–they kept falling out of the stitches. Two circs or magic loop would be easier to deal with)
Date started: May 12, 2008
Date finished: May 13, 2008
Mods: I was trying to use up the half-skein of yarn left over from my Rusted Root–I ran out of yarn at row 31 and had to rummage around to find the other half-skein of yarn left over from the Bainbridge Scarf so I could finish the cloth. I had some left over, so I knit a little garter stitch loop to use for hanging the cloth up to dry (just cast on 3 sts, knit every row for maybe 2 inches, folded it over, picked up stitches from the base of the loop and knit them together with the live stitches) and used the rest of the yarn to single-crochet around the outer border of the washcloth. Also, I used a lighter weight yarn and larger needles than recommended.
Notes: I don’t know the last time I spent so little time on a project and wound up with something so pretty and functional! Again, this photo is before washing and drying the cloth, so the knitting isn’t terribly even-looking. I think this is a great pattern, though–very easy to follow and fast to knit, with beautiful results.